San Diego Toilet Repair Pros
Home › Services › Toilet installation and replacement

Toilet Installation and Replacement in San Diego

Replacing a toilet is a same-day job when it is done correctly: new fixture set level, sealed and tested, old one hauled away, and the price agreed in writing before we begin.

Typical range: $350 to $800 standard · Free estimate first
Call (888) 784-0722Free estimates · Open 24/7
New white two-piece toilet installed in a San Diego bathroom

When replacing beats repairing

Repair when the toilet is structurally sound and a part has worn out. Replace when:

  • The bowl or tank is cracked or the glaze is crazed
  • It clogs constantly even after cleaning and diagnosis
  • It is a 3.5 or 5 gallon-per-flush fixture from before the 1990s
  • It has repeated failures and the repair total is approaching half the cost of a new one
  • You are remodeling and want a taller, one-piece, or wall-hung design

Read our cost guide for how we weigh repair against replacement.

California rules to know

California has required water-conserving toilets in new sales and installations for decades. State law defines a non-compliant toilet as one that uses more than 1.6 gallons per flush, and current code for new installations is 1.28 gallons per flush WaterSense-certified. When you pull permits for alterations to older homes, non-compliant fixtures generally must be replaced. Our guide to California's water-conserving toilet law explains what applies to you, including rebate programs that may help.

What is included

  • Removal and disposal of the old toilet
  • New wax or wax-free seal and new closet bolts
  • New braided supply line and, if needed, a new shut-off valve
  • Setting the toilet level and secure, caulking if desired, and testing repeated flushes
  • Cleanup, and the bathroom left as we found it

You can supply your own toilet or we can supply one. We will tell you if a toilet you picked is a poor fit for your rough-in distance, which is the measurement from the wall to the center of the drain, commonly 12 inches but 10 and 14 exist, especially in older homes.

What can change the price

  • Rough-in and drain condition. Older flanges may need repair.
  • Toilet style. A standard two-piece is least expensive. One-piece, comfort height, elongated, skirted, and wall-hung cost more to install.
  • Access. Tight spaces, upper floors, and condos with rules about deliveries or shut-offs.

Typical San Diego pricing

JobTypical range (installed)
Standard two-piece, 1.28 gpf$350 to $800
One-piece or comfort-height premium$700 to $1,300
Wall-hung with in-wall carrier$1,200 to $2,500 and up
Labor only for a toilet you supply$200 to $450

Free written estimate first, and that estimate is the price.

Common questions

How much does toilet installation cost in San Diego?
A standard toilet installed is typically $350 to $800. Premium and wall-hung models cost more. You get a free written quote first.
Can you install a toilet I bought myself?
Yes. Labor-only installation is typically $200 to $450. We check that it fits your rough-in and will tell you if there is a problem before you buy.
Do you haul away the old toilet?
Yes, removal and disposal are included.
What is a rough-in and why does it matter?
It is the distance from the finished wall to the center of the drain. Most toilets fit a 12-inch rough-in. A wrong match means a toilet that will not sit right.
Are there rebates for a new toilet in San Diego?
Sometimes. Programs through SoCal WaterSmart and regional water agencies have offered rebates for qualifying high-efficiency toilets, but amounts and eligibility change. Read our SB 407 guide and check the current program before you buy.

Toilet giving you trouble? Call now for a free estimate.

Same-day scheduling is usually available. You get a written price before any work starts.

Call (888) 784-0722
Call (888) 784-0722 · Free estimates