
What SB 407 is
SB 407 is a 2009 California law (Civil Code sections 1101.1 through 1101.8) that requires older plumbing fixtures to be replaced with water-conserving ones. It applies to buildings built and available for use on or before January 1, 1994, and, since state law banned sale or installation of non-compliant fixtures after that date, it targets fixtures installed before then.
Which toilets are non-compliant
Under the law, a non-compliant toilet is one manufactured to use more than 1.6 gallons per flush. Older fixtures used 3.5 to 5 gallons per flush, so they are clearly affected. Current code for new installations is 1.28 gallons per flush, WaterSense-certified for tank-type toilets.
The law also covers other fixtures: showerheads above 2.5 gallons per minute, interior faucets above 2.2, and urinals above 1 gallon per flush.
When replacement is required
The law has two main triggers in the building code context:
- Building alterations or improvements. For permits on properties built on or before 1994, non-compliant fixtures generally must be replaced as a condition of final permit approval. Many cities use a certificate or affidavit for this.
- Property transfers and disclosure. The seller must disclose non-compliant fixtures. The City of San Diego states that, as of February 28, 2022, it no longer requires property owners to file a Water Conservation Certificate on resale, but the disclosure requirement between seller and buyer remains, typically on the Real Estate Transfer Disclosure Statement.
Because details differ by transaction, ask your real estate agent or the city building department what applies to you.
How to check your toilet
Look inside the tank, on the back of the bowl, or under the lid for a stamp with the gallons per flush, such as 1.6 gpf or 1.28 gpf. If there is none, look at the date code. A toilet made before 1994 is likely non-compliant. Very old toilets, with round-front bowls and tall tanks, often used 3.5 gpf or more.
Why it matters beyond compliance
The EPA notes toilets are the largest indoor water user, roughly 30 percent of household indoor use. A modern WaterSense toilet uses far less than an old one, so replacement can reduce your water bill. San Diego County's regional water programs have long encouraged replacements, and earlier programs covered hundreds of thousands of fixtures.
Rebates and programs
Rebates for qualifying high-efficiency toilets have been offered through SoCal WaterSmart and regional water agencies, and the City of San Diego points residents to the Metropolitan Water District's Be Water Wise program for incentives. Amounts, eligible models and funding change, and some programs require approval before you buy, so check the current details before purchasing a toilet. Income-qualified direct-install programs have also been offered in the region.
How we help
We install compliant toilets, take away the old fixture, and can help you pick a model that fits your rough-in. See toilet installation and replacement for what is included and typical pricing, and the cost guide for how replacement compares to repair. Older neighborhoods like Clairemont and Mira Mesa are where we most often see original high-volume toilets.