
Why a running toilet matters
A toilet that runs, hisses, or refills by itself is leaking water from the tank to the drain. Left alone, it wastes a large amount of water over weeks, and the EPA notes that leaking toilets can waste hundreds of gallons a day in bad cases. It also usually gets worse, so it is worth fixing.
Step 1: Listen and look
Take the tank lid off and set it somewhere safe. Look at the water level relative to the overflow tube, the tall open pipe in the middle of the tank. Water should stop about an inch below its top.
- Water spilling into the overflow tube: the fill valve or float is set too high or failing.
- Water level is fine but the tank refills every few minutes: the flapper is leaking into the bowl.
- Hissing with no flushing: the fill valve is worn or its screen is clogged.
Step 2: The food coloring test
Add several drops of food coloring to the tank water and do not flush. Wait 15 minutes. If color appears in the bowl, the flapper is not sealing. This test is reliable and free.
Step 3: Try the safe fixes
- Turn off the wall valve, flush to empty the tank, and wipe the flapper and its seat with a cloth. Mineral scale is common here, see San Diego hard water. Turn the water back on and test.
- Check the chain. It should have a little slack, about half an inch, not so tight that it lifts the flapper and not so long that it jams under it.
- Adjust the float on the fill valve so the water stops an inch below the overflow tube top.
- If the flapper is warped, sticky or hard, replace it with the correct type. Bring the old one to the store, because flappers come in different sizes.
Do not put bleach tablets in the tank. They deteriorate rubber parts and shorten the life of flappers and seals.
When to call a plumber
- The fill valve is the culprit and you are not comfortable replacing it
- You replaced the flapper and it still runs, which means the seat or flush valve may be damaged
- The toilet is leaking at the base, not just running. See toilet leak repair
- The tank or bowl is cracked
- You have a pressure-assist, dual-flush or brand-specific system. See specialty repair
Professional running toilet repair typically costs $95 to $250, depending on the parts, and usually takes under an hour. Compare with the cost of the wasted water and the value of your time. Full price context is in the San Diego toilet repair cost guide.
Why it comes back
If a running toilet returns within a year, the cause is usually one of these: the wrong flapper size, a worn flush valve seat, high water pressure, or heavy use as in a rental. Homes lower on hillsides can see higher pressure, see La Jolla, and busy rentals in Pacific Beach wear parts quickly.